Cables & Wires
Inox Pumps manufactures SS Cables & Wires for submersible pump systems that run in standing water, fluctuating loads, and underground installations for years without a swap-out. Our PVC and rubber jackets resist abrasion, cuts, and constant flexing, keeping seal integrity through repeated pump installs and removals. We cut every cable to the exact length you specify, removing splice joints and the failure points that come with them.
Temperature swings are where most cable insulation fails first. Our cables hold their flexibility and dielectric strength from -50°C to 105°C, covering cold borewell shafts and motor housings that run hot under continuous load. That range supports use across automotive wiring, robotics, telecommunications, and submersible pump OEM lines.
submersible pump cables, submersible winding wires, submersible pump wire, well pump wire, submersible water pump cable, Pump Cables Supplier
Our cables deliver exceptional performance at temperatures ranging from -30°C (-22°F) up to +105°C (+221°F). This means that our cables are ideal for a wide range of industries and applications such as automotive, robotics, telecommunications, and many more.
Choose SS Cables & Wires to get the best quality product that is sure to last in any environment. With a variety of customizable options and superior performance, you’ll have peace of mind that your cables will last long in any environment.
Drum reeling cable, flat crane cable, pump wires manufacturer, pvc submersible motor winding wire, Submersible Pump Wire, PVC Submersible Motor Winding Wire.
Specification of Cables & Wires
Conductor
Copper
Insulation
Rubber, PVC
Temperature Range
-30°C to +90°C
Nominal Voltage
450/750V
Test Voltage
1000V
Maximum installation depth
450m for CD Series, 250m for CM series, and 80m for CS series
Types Of Cables And Wires
Flat Pump Cables
Well Pump Wiring
Round Pump Cables
Parameter Of Pump Cables & Wires
| Conductor Size | Max Diameter of Wire(0.21mm) | Coated Layer Thinckness (mm) | Sheath Thickness(mm) | Total Diameter(mm) | Max. resistance at 20℃ (Ω/km) |
| 16 | 0.21 | 2.0 | 1.3 | 10.3 | 1.16 |
| 25 | 0.21 | 2.0 | 1.3 | 11.5 | 0.785 |
| 35 | 0.21 | 2.0 | 1.3 | 13 | 0.536 |
| 50 | 0.21 | 2.0 | 1.5 | 15 | 0.379 |
| 70 | 0.21 | 2.5 | 1.6 | 17 | 0.268 |
| 95 | 0.21 | 2.5 | 1.7 | 19.5 | 0/198 |
Key Features of Pump Cables And Wires
Inox Pumps cables are engineered around the conditions submersible pumps actually face: standing water, voltage variation, and years of underground service. Here's what each cable delivers.
Built for tough, wet environments
The cable construction stays flexible under moisture and weather exposure, which matters most for a conductor sitting below water level year-round. Wet electrical properties hold up too, with insulation resistance that doesn't drop off after prolonged submersion. Oils, chemicals, ozone, and solvents around the pump housing don't degrade the jacket either.
Engineered for safety and durability
Conductor design stays safe and power-saving, limiting resistive losses across the cable run. The jacket resists cuts, tears, and abrasion, which counts for a lot in a rock-lined borewell shaft. Impact resistance carries the cable through rough handling during installation without nicking the insulation.
Configurable to your installation
Cables come in 1 core, 3 core, and 4 core configurations, in flat and round profiles, with a choice of PVC or rubber insulation and jacket. Sizing runs from 1 sq mm to 240 sq mm on the European standard, or 14 AWG to 500 MCM on the North American standard, with sequential meter and foot marking for accurate length tracking.
Compliant and rated for global markets
The voltage ratings are 450/750V, 600V, 650/1100V, 600/1000V and 3000V for different markets. They are certified to IS 694, BS 6500, IEC 60227, DIN VDE 0281, VDE 0282, BS 6007, UL 83, SABS 1574, AS 3191, AS/NZS 5000.1. RoHS compliant PVC option for drinking water pumps.
Request a quote with your core count, length, and voltage rating, and our team will confirm stock and lead time.
Frequently Asked Questions
Submersible pump cables carry power from the surface panel to the motor below water level and link pump stages in multi-motor setups.
Inox Pumps cables use copper conductors across all core configurations, from 1 sq mm up to 240 sq mm. Copper carries higher current density than aluminum at the same gauge, keeping voltage drop low over long borewell runs.
Yes, if the grade of PVC is rated for the temperature and exposure to water. Our PVC jacketed copper cables are in accordance with IS 694 and IEC 60227 and are rated from -50°C to 105°C.
Service life is not a fixed number, but depends on water chemistry, depth and frequency of cycling. Cables rated to our abrasion and chemical resistance specifications typically outlast the motor they're connected to.
Cable failure below the water level means pulling the entire pump assembly for repair, costing far more than the cable itself. Sourcing from a manufacturer tested to IS 694, UL 83, and AS/NZS 5000.1 reduces that risk before installation.
-
Countries
Tibet, South Africa, United Kingdom, Germany, Mexico, Bhutan, New Zealand, United States, Netherlands, Morocco, Malaysia, Bahrain, Canada, Spain, Qatar, Thailand, Philippines, Belgium, Poland, Sweden, Switzerland, Nepal, China, Israel, Australia, Singapore, Vietnam, Afghanistan, France, United Arab Emirates, Oman, Japan, Norway, Denmark, Saudi Arabia, South Korea, Taiwan, Egypt, Austria, Sri Lanka, Russia, Greece, Kuwait, Hong Kong, Italy. -
Cities
Bengaluru, Nagpur, Gurgaon, Thane, Nashik, Delhi, Navi Mumbai, Ahmedabad, Bhopal, Chennai, Ernakulam, Mumbai, Hyderabad, Rajkot, Pune, Ranchi, Chandigarh, New Delhi, Haryana, Indore, Ludhiana, Faridabad, Pimpri-Chinchwad, Kanpur, Surat, Visakhapatnam, Ahmedabad, Thiruvananthapuram, Jamshedpur, Noida, Kolkata, Jaipur, Howrah, Secunderabad.